Timken Company

North Canton, OH 44720

COMPANY OVERVIEW

About Timken Company

Contact

4500 Mount Pleasant St NW
North Canton, OH 44720
http://www.timken.com
234-262-3000
330-458-6006

More Info on Timken Company

PRODUCTS & PRESS RELEASES

Articles & News

177079291 | Vitpho | Dreamstime.com
Grease’s primary goal as a lubricant is to separate the mating surfaces of components by creating a lubricant film under contact stresses.
Aug. 20, 2020
Basic knowledge and best practices for keeping fleet vehicles properly lubricated.
Photo courtesy of Timken
Timken Lightweight Race Pac Assembly (1)
April 30, 2019
Selecting the best grease for the application can help optimize wheel bearing performance.
Photo from Timken
Premium Wheel Hub Units 340x257
March 21, 2018
To avoid a possible catastrophic wheel end failure, never put a unit back into service without a complete inspection and repair.
Photo courtesy of Timken
When packing bearings with grease by hand, technicians should start by placing a golf ball size pile of grease into the palm of one hand. Then, using their other hand, push the large end of the bearing cone assembly into the grease.
April 10, 2017
To extend the reliability of its vehicles, a fleet needs to get to know greases.
Wheel off incidents, which can lead to costly delays and tragic accidents, are largely preventable through proper installation and maintenance of wheel ends.
June 13, 2012
Maintenance staff and drivers need to work together to avoid wheel end issues and reduce downtime

Videos & Resources

Maxresdefault 5cace74554653
April 9, 2019
In this video, Timken demonstrates how to program a hub odometer for your commercial vehicle wheel hub.
Maxresdefault 5b2034f7179ab
June 12, 2018
Tips on how to remove cups from commercial vehicle aluminum wheel hubs.
Maxresdefault 5b1e7efbd3723
June 11, 2018
How to install a Timken Set-Right Bearing on a commercial vehicle wheel end.
Maxresdefault 5af1c07120e4b
May 8, 2018
How to install a Timken Premium Seal on a commercial vehicle wheel end.
Maxresdefault 5adf5e5c8821a
April 24, 2018
In this video, Timken demonstrates how to program a hub odometer for a commercial vehicle wheel hub.
Tkr09060103 58e7b36c2b133
April 7, 2017
Follow these steps for an accurate and complete analysis when investigating any bearing damage or system breakdowns.

KEY CONTACTS

Request More Information

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.

All content from Timken Company

Tkr14110297 58e7b2ad288f8
April 7, 2017
When selecting the proper lubrication, the first consideration is whether oil or grease is best for the particular operation.
10689CV pg 1 57b739d6c6e5f
Aug. 19, 2016
Today's trucking industry stands on the brink of a remarkable transformation in operating efficiency. Exciting new technologies promise to significantly reduce fuel consumption...
10689CV pg1 577d4b22c7b26
July 6, 2016
Today's trucking industry stands on the brink of a remarkable transformation in operating efficiency. Exciting new technologies promise to significantly reduce fuel consumption...
Timken Tricks Of The Trade: Wheel End Bearing Removal Tips
April 25, 2016
Here are some tips to help with removal and installation of wheel bearings.
VIDEO: Timken Tricks of the Trade: Removing A 2-Piece Seal Wear Ring
April 25, 2016
Here are some tips to ease seal wear ring removal.
Timken 1998-2004 Grand Cherokee axle bearing Video
June 9, 2015
The importance of selecting the correct axle bearing to ensure proper end play and avoid brake issues.
Timken GM axle nut styles Video
June 9, 2015
The importance of selecting and properly installing the newer single-piece nut.
Timken effect of corrosion on ABS sensors Video
June 9, 2015
How to resolve ABS brake system problems by removing corrosion around the sensor input hole.