LSI Chemical now offers four new diesel fuel additives for diesel and biodiesel fuel blends, all exceeding top-tier detergency requirements. Developed with a cetane improver, the additives can be used for downstream fuel production to restore power and fuel economy while providing long-term protection against corrosion and waxy polymeric deposits.
TotalArmorClean 450 is a multifunctional aftermarket additive that improves ignition, power, and fuel economy. This additive is engineered to remove “sticky” injector deposits including both External Diesel Injector Deposits (EDIDs) and Internal Diesel Injector Deposits (IDIDs). Developed to provide a significant performance boost and raise cetane numbers by seven points, this additive resulted in restoring power by 87% in a modified Peugeot CEC F98-08 DW-10 test.
TotalArmor 607 improves wear protection by using the most advanced lubricity chemical available, controls injector deposit formation, and controls moisture. Multifunctional, this additive also increases diesel fuel cetane rating by seven points, prevents rust and corrosion, and demulsifies water and neutralizes acid. The result is increased fuel economy, increased horsepower, reduced emissions and soot output, and even the poorest quality ULSD fuel is put back into specification through added lubricity for wear scar protection.
ArcticArmor 523 is a cold flow improver for diesel fuels to improve low-temperature performance and greatly improve winter operability. It is engineered to improve multiple characteristics of diesel, including Cold Filter Plugging Point (CFPP), Pour Point, and Cloud Point for today’s modern diesel fuels and typical biodiesel blends and is recommended for all diesel engines. The DFPP test demonstrated an improvement when compared to Marathon baseline diesel from -20°F/-28°C to -45°F/-42°C. The Pour Point improved from -20°F/-28°C to -75°F/-59°C, the company stated. Cloud point is lowered by solubilizing paraffin nuclei as they begin to crystallize, and the pour point depressants modify paraffin crystal’s growth as they precipitate.
TotalArmor W7 is another winter blend diesel fuel aftermarket additive. However, it ensures complete operability in freezing temperatures. Engineered to provide consistent winter operability, this additive also increases cetane up to seven points for improved power, fuel economy, and cold starts. Formulated with cloud point and pour point depressants, anti-settling agents, detergents, and a powerful lubricity improver, TotalArmorW7 prevents gelling and icing by dispersing moisture in freezing temperatures, minimizing the size of wax crystals and preventing paraffin wax precipitation.
“Each product has been carefully engineered to deliver specific improvements that can be used in the aftermarket—fuel jobbers, fleets, diesel fuel refiners, and end consumers [alike]—to improve fuel for resale,” said LSI Chemical President Todd Cawley. “As diesel fuel experts, we have sourced products and tested combinations to ensure that what we bring to market will exceed expectations. Each product is rigorously tested and proven to perform. Our sampling program and top notch R&D lab is available to customize fuel based on the specific needs of your region or customer base.”